A Guide to Wood Science
The Biological research of wood and it’s renewable material is what is referred to as wood science. In other words, the term wood science can also be known as wood technology. To be able to study wood it has to be compared to other products. The wood is checked against the other materials properties, performances, value, and work-ability. The utilization of technology gives wood an upper hand in most of this comparison. Some of these advantages include wood being a versatile material that can be used in a wide range of products. Wood is renewable, and this makes it more precious. All the parts of wood can be put into use, and this makes it a better fit than other materials which most of their byproducts are a waste.
Protection of wooden structure and products is a must if you want to keep the good looks in place. This protection is from moisture and insects which are the biggest threat to wood. The moisture courses the timber to decay and the insects eat through the wood. Many methods are available in the treatment of wood one of the most common being the ACQ – alkaline copper Quaternary. The protection of from this chemical is based on copper. As effective as this preservative, it has some downside to its use. It is a highly corrosive chemical that affects most metals that are used together with the wooden products. The saturation level of any treatment will depend on where the wood is going to be used and the species of the wood. The concentration level of the chemical will be different for two pieces of wood where one is used above ground and the other close to a water body.
The use of copper metal is another method of wood treatment that is fast being accepted. This method is being accepted fast because is friendly to wooden fasteners. This process is what in other words called the micronized copper wood preservative. A high-pressure liquid that has the copper metal mixed in it is driven into the wood. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. This process is highly effective and the wood properties and heightened. The time the wood products treated using this method last is longer other types of treatment.
The micronized copper preservative has proven to be highly effective in protecting the wood against fungal decay and termites. Unlike other methods of treatment this method is not corrosive. When you use this method to treat wood, then you will not need to worry for at least ten years.
Suggested Article: site